Motorised Actuators

The DIGI-MIC, DC-MIC and MMS 19 from OWIS provide the means to motorise your chosen optical motion control set up. With an accuracy microns or sub-microns over a 25mm travel, you have precise control over where the light goes in your system.

» Request 3D PDF or 3D CAD model for the item(s) of interest.

DIGI-MIC & DC-MIC Actuators with Spindle

The DIGI-MIC and DC-MIC are precision actuators with a precision of ± 3µm, a travel of 25mm that can be reached in under 90 seconds. Operation is by a gear driven by a step motor or by DC servo motor with or without an encoder. Mounting is easy with an M12 x 0.5 tread. Both are equipped with integrated limit switches and ground fine thread spindles. Vacuum compatible versions are available.

» Download Datasheet

OWIS MMS 19 Actuator

MMS 19 Actuator with Rotating Tip

The MMS 19 linear actuator provides extremely precise linear motion over 25mm of travel with sub-micron resolution. It consists of a compact micrometer with non-rotating tip driven by a 2-phase step motor or a closed-loop DC servo motor.

» Download Datasheet